#Do trex boards get hot professional

Curved decks make the house as interesting on the outside as the stuffed shark hanging about the mantle in the living room.

The unit requires a standard AC outlet that can accommodate 15-amps.ĭecks make the house.

At 70-degrees, the propane will burn for around 6-hours.

That heater is a back-straining 350-pounds or so.

That means the furnace will swallow boards at least 8-feet long.

Clamps to hold the hot composite in place.

A bending table which will keep things accurate through precisemeasurement.

When you decide to shop for a Trex CustomCurve Heating and Bending Solution this is what you’re looking at when carting the whole schmear home. If you’re all alone, cut the productivity in half – say 10 planks a day.

Going faster with that process only needs a cool spray from your garden hose.ĭo you have a whole crew working on this project? During an 8-hour period you might be able to modify around 20 planks. You can cool the composite by simply letting it sit in place. The only exception: If you’re trying to incorporate a Mobius strip design, you’ll need to perform this task in another dimension. There are anchors on said table to give you the flexibility of almost any curve you need. Once you roll the optimized composite out of the heater, take it to the bending table, clamp it into place and begin your pre-measured shaping. Takes around 45-minutes per piece to reach optimum benditude for Trex Transcend. Trex will no doubt tell you other brands will melt, spontaneously combust or explode if you attempt to us a non-Trex brand, and they might, so attempt to bend non-Trex products at your own risk. We know it takes 250-degrees for Trex Transcend. You’ll just need to find-out how warm the different materials need to be to bend them. It works best on Trex composites, but that doesn’t mean you can’t try to curve another brand. The fan keeps the heat regular and uniform. There’s a thermostat to give you the exact temperature to tweak the composite’s sweet spot. You can shape around 15 planks on a tank of fuel. What you get with the Trex CustomCurve Heating and Bending Solution is an air-controlled furnace to heat the composite material, a table that allows you to bend and shape the stuff and accessories to keep the curve before you hammer or bolt the material in place. Building a deck made from composites? You really need to check-out this unit. For those who want a deck that’s more Fonzie than Chachi, this device will not jump the shark. It’s named the Trex CustomCurve Heating and Bending Solution.

Renting one might be best for the person who wants the pleasure of bending wood for a one-shot job. Not to say that a DIYer couldn’t own one but you’d need to be filthy rich or pound-stupid to let it sleep in your garage.

#Do trex boards get hot professional

Here’s a little ditty if you’re a professional deck builder.